Image is not available
Image is not available
Image is not available

One Sightsolutions are a leading iSMA Controlli product distributor across the UK. The MAC36 BMS controllers running the Niagara Framework offer powerful data integration with vast expansion options. Get in touch with our fantastic team

Home » iSMA FCU & Touch Point Panel Bundle

Need help deciding which solution is right for you? Contact sales on 020 3744 9539

isma controlli mac36 nl

iSMA FCU & Touch Point Bundle

Maximise your efficiency and cost savings when your purchase any iSMA FCU HL, LL or HH controller and a Touch Point wall panel together. The iSMA FCU family are fully programmable controllers, built with the aim of controlling the FCU (Fan Coil Unit)

The iSMA Touch Point is a modern comfort management wall panel available with different configurations of sensors (temperature, CO2, and humidity), colors, and versions with or without display. Both products use the two most popular open communication protocols: Modbus RTU/ASCII and BACnet MS/TP.

Product Description

iSMA FCU HH features: Get in touch about other FCU models

To minimise time and simplify commissioning process the iSMA FCU-HH is delivered with universal application, which supports the most popular types of FCU. Dedicated DIP-switch allows to adjust parameters of the application. Additionally, in the BACnet protocol, the application has the built-in function which allows automatically to bind Master and Slave controllers in the groups. In the case, if the application does not meet the project requirements, it can be modified or created from scratch. Changing of the application is possible in real-time by USB port. There are three hardware versions which have different types of Triac Outputs and power supply.


  • 4x Special Input – voltage, resistance, dry contact
  • 4x Digital Input – dry contact


  • 3x Digital Output 6 A (Fan Speed)
  • 1x Digital Output 10 A (electric heater)
  • 1x Digital Output 6 A (cooling actuator)
  • 2x Triac 0,5 A @ 230 V AC (heating and cooling, actuators)
  • 3x Analog Outputs 0-10 V DC (heating, cooling actuators and Fan Speed)


  • Interface RS485 half duplex
  • Up to 128 devices on the bus
  • Protocols: Modbus or BACnet
  • Baud rate: 4800 to 115200 bps


  • ARM Cortex-M4

iSMA Touch Point features:

Product Description

The panel is equipped with an interactive TFT touchscreen, touch buttons, and glass panel. It fits most of standard junction boxes in Europe and can easily be installed using a wall back box.


• Modern and smart design
• Intuitive management
• Ease of installation and configuration
• Multiprotocol interface
• Ultimate flexibility
• Free software: iSMA Tool & iSMA Configurator
• Five touch function buttons
• RS485 interface
• Modbus RTU/ASCII and BACnet MS/TP
• Temperature sensor as a standard, humidity and CO2
sensors as an option
• USB type C interface
• DIP switches for configuration
• Buzzer
• Navigation RGB LED

SD card
RJ45 with PoE+
WiFi 802.11 b/g/n
Bluetooth Bluetooth 4.2
Audio: 3.5 mm earphone, 2 speakers, 1.5 W

Power supply
Power input 12 V DC / 1.5 A
PoE+ IEEE802.3at, class 4, 25.5 W
Power adapter for EU, US, and UK

Get pricing and info here

Enhance your Niagara station

Exclusive Niagara drivers that overcome integration challenges and enhance productivity delivering projects

You might also like
iSMA Controlli MIX38 IO Module

Equipped 8xUI, 12xDI, 6xAO, and 12xDO

iSMA Controlli MG-IP Gateway

M-Bus & Modbus BMS meter gateway

iSMA Controlli RAC18-IP Controller

HVAC, light & blind IP controller with 18 I/O

iSMA Controlli MAC36NL-RS Controller

Niagara 4 Controller w/ 36x IO & 2x RS485