Single-phase Energy Meter wall mounted unit

  • Real Time Electricity Active Power Measurement up to 15 kW with external CT included
  • Electricity Energy Counter
  • Digital output to drive external high power relay
  • Stand-by killer
  • Override push-button
  • CT included with core split
  • Wall Mounted
  • Modbus profile on ZigBee platform
  • Router function

The ZR-HM.W-M electricity meter includes an external 70Amp current transformer to measure real time active power up to 15 kW and has an energy counter.
Moreover it has a digital output to drive high power relay. Functions as  stand-by killer and override push button are also available. It is possible to set a power limit below of which the load is considered in stand-by mode and therefore the external relay is switched off. With the override push-button the user can override the last relay order issues by the Gateway. All the function are activated by simple ModBus commands issued to the Gateway that transforms those commands in wireless commands.
The device is continuously powered by 230 Vac; therefore it can also act as a repeater or a “parent” device for battery-powered sensors.

Technical specs

General characteristics Chip Ember EM250
Compatible IEEE 802.15.4
Stack EmberZnet 3.5.x (ZigBee PRO)
Address settable through radio commands
Radio characteristics Frequency: 2405 MHz ÷ 2480 MHz
Nominal transmission power: 2mW (3 dBm)
Receiver sensitivity: -95 dBm
Internal antenna gain: 0 dB
Range outdoor/indoor: 100m/30m
Power Supply 90/250 Vac; 1W; 50/60Hz
Measurement Active Power [W] Energy consumption [Wh]
Digital output For auxiliary relay 230 Vac, 40mA max.
Connections Terminal blocks (5,08 mm pitch)
CT 70A max.
Environment parameters Operating temperature: -10 ÷ +60°C; <80% U.R. not condensing
Storage temperature: -20 ÷ +70°C; <80% U.R. not condensing
Conformity Community Directives 2006/95/EC, 89/336/EEC, 99/5/EEC