Analouge Inputs 0-10v, Digital Inputs with Router

  • Two analog inputs to detect a voltage direct-current signal in between 0 and 10 Vdc
  • Two digital inputs
  • 12-24 Vdc/Vac supply
  • RF power amplifier: 10 mW
  • Routing function
  • External antenna
The ZR-AIV-EM features to anolog inputs to detect a voltage direct-current signal in between 0 and 10 Vdc, plus 2 other digital inputs. The digital inputs control up to 2 pulse counters. This device acquires the inputs and sends the data collected and generated to a compatible gateway at regular intervals. The ZR-AIV-EM is supplied continuously; therefore it can also act as a repeater or a “parent” device for battery powered sensors.
Technical Characteristics


General characteristics
Chip Ember EM2420
Compatible IEEE 802.15.4
Stack EmberZnet 3.5.x (ZigBee PRO)
Device address settable via internal dip-switch
Wall mounting with screws
Cable gland: PG9
RF characteristics
Frequency: 2405 MHz ÷ 2480 MHz
Modulation: DSSS
Nominal transmission power: 10mW (10 dBm)
Reception sensitivity: -97 dBm
External antenna gain: 5,5 dB
Coverage outdoor/indoor: 200m/50m
Power Supply
24Vcc/Vca (±10%); 100mA; 50/60Hz
Analouge input
0-10 Vdc
Reading accuracy ±1%
Input impedence: 5 KOhm
Digital inputs
Electronic type not insulated inputs for clean contact.
Short circuit current 0,01mA. Use self-cleaning contacts.
Pull out terminals (3,81 mm pitch)
Environment parameters Operating temperature: -10 ÷ +60°C; <80% U.R. not condensing
Storage temperature: -20 ÷ +70°C; <80% U.R. not condensing
Degree of protection: IP 55
Compliant with 2006/95/EEC, 89/336/EEC, 99/5/EEC directives Reference Norms ETSI EN 300 328: Radio Compatibility for digitals wide band transmissions ETSI EN 301 489: Radio Compatibility
EN 61000-6-2: Electromagnetic Compatibility – Emissions
EN 61000-6-3: Electromagnetic Compatibility – Immunity
EN 60950-1: Electric Safety