ECB-400 Series

ECB-400 Series

The ECB-400 Series controllers are microprocessor-based programmable controllers designed to control various building automation applications such as air handling units, multi-zone applications, chillers, boilers, pumps, cooling towers, and roof top units.

ECB-400 Series

BACnet B-AAC 24-Point Programmable Controllers

The ECB-400 Series can also be used for lighting control applications. This controller uses the BACnet® MS/TP LAN communication protocol and is BTL®-Listed as BACnet Advanced Application Controllers (B-AAC).

These controllers meet the requirements of the following applications:

  • Air Handling Units
  • Chillers
  • Boilers
  • Cooling Towers
  • Heat-Exchangers
  • Pumps
  • Lighting Control

Universal Inputs and Outputs

This controller has various software configurable universal inputs and software configurable universal outputs, and covers all medium to large-size industry-standard HVAC applications.

Rugged Inputs/Outputs

Rugged hardware inputs and outputs eliminate need for external protection components, such as diodes for 12V DC relays.



Supports EC-gfxProgram

Supports Distech Controls’ EC-gfxProgram, which makes Building Automation System (BAS) programming effortless by allowing you to visually assemble building blocks together to create a custom control sequence for any HVAC / building automation application.

  • Open-to-Wireless

    The controllers are Open-to-Wireless™ ready, and when paired with the Wireless Receiver, work with a variety of wireless battery-less sensors and switches, to reduce the cost of installation and minimize the impact on existing partition walls. Available with an optional Wireless Receiver that supports up to 28 wireless inputs to create wire-free installations.

  • Highly Accurate Universal Inputs

    Highly accurate universal inputs support thermistors and resistance temperature detectors (RTDs) that range from 0 Ohms to 350,000 Ohms, as well as support for inputs requiring 0 to 10VDC or a pulse count. 0-20mA inputs and outputs have a jumper that eliminates the need for external resistors. This provides the freedom of using your preferred or engineer-specified sensors, in addition to any existing ones. The first four universal inputs support fast pulse count reading up to 50 Hz for gas, water, and electric meters and are compatible with an SO rated (optically-isolated) output.

  • HOA Switches & Potentiometers

    Certain models have the convenience of supervised Hand-Off-Auto (HOA) switches and potentiometers that provide feedback on an operator’s manual override of an output to the controller’s code. HOA switches are ideal for testing purposes or when performing equipment commissioning and maintenance.

  • UUKL Smoke Control System

    The Distech Controls UUKL Smoke Control System is designed to protect occupants and buildings in the event of a building fire by maintaining tenable evacuation routes and containing smoke within the fire area. It is a unique NiagaraAX-based system that complies with the Underwriters Laboratories Inc® (UL) requirements for UL 864 UUKL 9th Edition Smoke Control Listing.

  • Increased Energy Efficiency

    Improves energy efficiency when combined with:

    CO2 sensors as part of a demand-controlled ventilation strategy that adjusts the amount of fresh air intake according to the number of building occupants

    Variable-frequency drives to adjust motor speed according to the instantaneous demand of the application.


Allure™ Series

Communicating Sensor Support

These controllers work with a wide range of sensors, such as the Allure Series Communicating Sensors that are designed to provide intelligent sensing and control devices for increased user experience and energy efficiency.

  • Allure EC-Smart-Vue sensors feature a backlit-display and graphical menus that provide precise environmental zone control, with any combination of the following: temperature, humidity, CO2 , and motion sensor
  • Allure EC-Smart-Comfort sensors feature colored LED indicators to provide user feedback, rotary knobs to adjust the setpoint offset and fan speed, and an occupancy override push button. This sensor can also be expanded with a combination of up to 4 add-on push button modules for lighting and shade/ sunblind control
  • Allure EC-Smart-Air sensors combine precise environmental sensing in a discreet and alluring enclosure for temperature, humidity, and CO2.
  • 12 universal inputs including 4 for fast pulse counting and metering applications
  • 12 universal outputs (ECB-400 Series), 8 digital outputs (TRIAC), and 4 universal outputs (ECB-403 Series)
  • Optional HOA switch with potentiometer to locally override and monitor overridden outputs
  • 2 calendar, 10 schedule, 30 loop (PID), and over 300 BACnet objects
  • 15 VDC power supply to power 4-20mA transducers