Allure EC-Smart-Vue

Allure EC-Smart-Vue

The Allure EC-Smart-Vue Series is designed to interface with Distech Controls’ ECL series LONWORKS® Controllers, ECB series BACnet® Controllers and ECLYPSE™ series BACnet/IP and Wi-Fi Controllers.

This line of communicating sensors with backlit display consists of eight models that provide precise environmental zone control. Models are available with any combination of the following: temperature, humidity, CO2 , and motion sensor.

SKU: Allure EC-Smart-Vue Categories: , Tags: , ,


Offers temperature, humidity, CO2 , and motion sensing for the following applications:

  • VAV controllers
  • Fan coil units
  • Roof top units
  • Unit ventilators
  • Heat pumps
  • ABC Logic Self-Calibration System

    The patented ABC Logic self-calibration system eliminates the need for manual CO₂ calibration in most applications. ABC Logic guarantees lifetime CO₂ calibration.

  • “4-in-1” Communicating Sensors

    Multi-sensing capabilities (temperature, humidity, CO2 , and motion) using one wire and one connection.

ECO-Vue Leaf Pattern

The innovative ECO-Vue Leaf Pattern graphically indicates energy consumption in real time to promote an occupant’s energyconscious behavior. Occupants are encouraged to have greener habits with the ECO-Vue Leaf Pattern while reducing energy costs. As more leaves appear, greater energy efficiency is being achieved, while fewer leaves will encourage the occupant to take corrective action to optimize the system’s environmental performance.

Energy efficiency levels:


  • Enhanced User Experience

    Occupants can view and adjust environmental settings to their liking, for example, view the space temperature, adjust the setpoint, control lighting through occupancy detection, set the fan speed, and apply occupancy overrides. Occupants can override the HVAC mode and view and adjust the setpoint and fan speed for improved personal comfort.

  • Appealing User Interface and Design

    Slim, compact style, and clean lines are well received by architects and building owners. Furthermore, the clear and bright LCD display provides real-time access to temperature and other system information such as setpoint, occupancy status, HVAC mode, etc.

  • Quick and Easy Installation

    Both power and communications pass through a single Cat 5e cable for reduced installation costs and for easier installation. Two RJ-45 ports facilitate the daisy-chain connections of room devices.

Supports Distech Controls’ EC-gfxProgram, which makes Building Automation System (BAS) programming effortless by allowing you to visually assemble building blocks together to create a custom control sequence for any HVAC / building automation application.

Increased Energy Efficiency

Achieve energy efficiency through occupancy-based control with:
Motion sensor to readjust the space temperature setpoint and manage lighting
CO2 sensor as part of the demand-controlled ventilation strategy that adjusts the amount of outdoor air intake according to the number of occupants

Commissioning and Troubleshooting

A password protected technician mode allows an installer to perform commissioning and troubleshooting. When connected to a controller that embeds preloaded applications, commissioning can start immediately after installation, as the Allure EC-Smart-Vue Series sensors can be used as a hand-held tool to select the appropriate controller application for the type of HVAC equipment to be controlled, and to troubleshoot the system.

When associated to VAV controllers, the Allure EC-Smart-Vue Series sensors also allows to perform air balancing of the system without requiring an onsite controls engineer.

Furthermore, when the controller uses wireless sensors, a technician in the field can use the Allure EC-Smart-Vue Series sensors to make the controller learn each wireless sensor’s ID on the fly, in order to commission the wireless sensors.