Download
Image is not available
Image is not available
Image is not available
Want more information or alternatives to a product? Call us
person_pin
Home » One Sightsolutions OSS-VAV

Need help deciding which solution is right for you? Contact sales on 020 3744 9539

New Releases

The Ultimate Niagara 4 UI

One Sightsolutions OSS-VAV

The oss-VAV controller is designed for simple and accurate control of any variable air volume box in a number of zone control configurations. It’s field configurable algorithms enable versatile implementation of required control sequences.

Different models available with varying TRIAC, feedback and fan power available. Used in perfect conjunction with the oss-TDU room sensors and displays

Communication: BACnet MS/TP or Modbus RTU

Get a quote
Product Description
• Single duct, cooling only
• Single duct cooling and/or heating
• Up to 4 stage reheat and/or cool
• Up to 4 On/Off heat and/or cool
• Up to 4 time proportioned (TPM) heat or reheat
• Up to 2 analog (0-10Vdc) reheat and/or cool
• Up to 2 floating heat and/or cool
• Pressure dependent or pressure independent
• With or without auto changeover
• Supply/exhaust (requires an additional EVC)
Features
• 24Vac operation
• Up to 4 inputs and 6 outputs
• Field configured VAV algorithm
• Built-in actuator 70in.lb [8Nm] (select models)
• On board differential pressure sensor (pressure independent models)
• Manual or automatic pressure mode selection
(pressure independent models)
• Configurable PI (Proportional-Integral) function
• Simple air balancing and commissioning via digital room sensor
• Independent, configurable proportional control band and dead band per ramp
• Selectable internal or external temperature sensor (10KΩ)
• Activate output with CO2 from digital room sensor or external CO2 sensor
• Change over by contact or external
temperature sensor
• Removable, raising clamp, non-strip terminals
• Potentiometer feedback for increased precision of actuator position (select models)

Inputs/Outputs

• 2 analog inputs
• 2 digital inputs Outputs:
• 2 analog outputs
• Up to 4 TRIAC outputs

Network

• BACnet MS/TP or Modbus RTU communication (selectable via menu)
• Select MAC address via DIP switch or via network
• Automatic baud rate detection

BACnet

• BACnet scheduler (up to 6 events)
• Firmware upgradeable via network
• COV (change of value)
• Copy and broadcast configuration to other EVCB modules via menu or network
• Automatic device instance configuration

Modbus

• Modbus RTU @ 9600, 19200, 38400 or 57600 bps
• RTU Slave, 8 bits (configurable parity and stop bits)
• Connects to any Modbus RTU master

You might also like
Tridium JACE 8000 IoT Controller

IoT/BMS Controller running Niagara 4

View
Custom printed JACE 8000 clip

Get more industry exposure with your printed logo

Enquire
Tridium Niagara 4 Driver solutions

Wide range of flexible drivers for your system

View
Tridium Niagara EDGE 10 Controller

IP-based Niagara controller w/ 10 built-in IO

View
Tridium IO-R 34 JACE Expansion

16xUI, 10xRO, 8xAO for JACE or EDGE

View