B-LP-H
iSMA
iSMA-B-LP-H is a room unit with 2.3” LCD display and four function buttons. Additionally, the room unit has the built-in temperature and humidity sensors.
iSMA-B-LP-H is powered with 24 V AC/DC and has the built-in RS485 port (Modbus RTU/ASCII and BACnet MSTP). Use of open communication protocol allows to connect the room unit with any controller supporting Modbus RTU/ASCII or BACnet MSTP. Together with iSMA-B-FCU controller, the room unit allows to change the basic parameters such as: temperature setpoint, fan speed, FCU mode and others. Thanks to built-in USB port, there is possibility to firmware update and room unit configuration without the necessity of power supply. iSMA-B-LP has the modern design and is available in different colours (white is basic) on client request.
Temperature sensor
- Type: 10k NTC
- Range: 0 – 50°C
- Accuracy: +/- 0,5°C
- Resolution: +/- 0,1°C
Humidity sensor
- Range: 0-100% RH
- Accuracy: +/- 2% RH in range 20 – 80% RH
- Resolution: +/- 1% RH
Communication
- 2x RJ 12 terminal (RS485 half duplex)
- Baud rate: 2400 to 115200 bps
- Protocol: Modbus, BACnet
- MINI USB, Type B
Platform
- ARM Cortex – M0+
Housing
- Dimension: 100x123x27 mm
- Construction: plastic, self-extinguishing (PC/ABS)
- Wall mounting (standard electric box)
- Cooling: internal air circulation
Environment
- Operating temperature: 0°C to 50°C
- Storage temperature: -40°C to 85°C
- Relative humidity: 5% to 95%, no condensation
- Ingress Protection Rating: IP20
- For indoor installation
Power supply
- 24 V AC/DC