B-LP-C
iSMA
iSMA-B-LP-C is a room unit with 2.3” LCD display and four function buttons. Additionally, the room unit has the built-in temperature and CO2 sensors.
iSMA-B-LP-C is powered with 24 V AC/DC and has the built-in RS485 port (Modbus RTU/ASCII and BACnet MSTP). Use of open communication protocol allows to connect the room unit with any controller supporting Modbus RTU/ASCII or BACnet MSTP. Together with iSMA-B-FCU controller, the room unit allows to change the basic parameters such as: temperature setpoint, fan speed, FCU mode and others. Thanks to built-in USB port, there is possibility to firmware update and room unit configuration without the necessity of power supply. iSMA-B-LP has the modern design and is available in different colours (white is basic) on client request.
Temperature sensor
- Type: 10k NTC
- Range: 0 – 50°C
- Accuracy: +/- 0,5°C
- Resolution: +/- 0,1°C
CO2 sensor
- Method Non Dispersive Infrared (NDIR), gold plated optics, diffusion sampling (with Telaire’s Patented ABC Logic Self Calibrated Algorithm)
- Range: 400 – 2000 ppm
- Accuracy: +/- 30 ppm OR +/- 3% of reading
- Stability: < 2% of FS over life of sensor (15 years typical)
- Warm Up Time : < 2 minutes (operational); 10 minutes (maximum accuracy)
- Calibration: ABC Logic Algorithm
- Manual Calibration Interval: Not required
Communication
- 2x RJ 12 terminal (RS485 half duplex)
- Baud rate: 2400 to 115200 bps
- Protocol: Modbus, BACnet
- MINI USB, Type B
Platform
- ARM Cortex – M0+
Housing
- Dimension: 100x123x27 mm
- Construction: plastic, self-extinguishing (PC/ABS)
- Wall mounting (standard electric box)
- Cooling: internal air circulation
Environment
- Operating temperature: 0°C to 50°C
- Storage temperature: -40°C to 85°C
- Relative humidity: 5% to 95%, no condensation
- Ingress Protection Rating: IP20
- For indoor installation
Power supply
- 24 V AC/DC
The datasheet for this product can be downloaded here in PDF format:
