B-2D-WD
iSMA
iSMA-B-2D-WD has been built in order to control light in a single space in the building. The device is dedicated to control two separate DALI light areas with up to 32 DALI ballasts. Built-in two Special Inputs and two Digital Inputs are dedicated to connect presence detectors and light switches.
Dedicated DIP-switch allows to activate predefined inputs configuration. Out of box the device allows to control the DALI ballasts by acommon light switch and a common presence detector without the need of programming, which makes iSMA-B-2D-WD the unique plug& play type device dedicated to DALI network control. The controller is factory-equipped with the RS485 interface which is the physical layer for the most popular open communication protocol Modbus ASCII/RTU.
Inputs
- 2x Special Input – dry contact
- 2x Digital Input – dry contact
Outputs
- 2x Light output 230 V AC max. 4 A
- 1x Power Supply Output 24V DC max. 80 mA
WARNING! Max. current for all the outputs is 8 A
Platform
- ARM Cortex – M4
Housing
- Dimension: 123,6×136,6×54,5 mm, (123,6×171,2×54,9 mm with plastic cover for terminals)
- Construction: plastic, self-extinguishing (PC/ABS)
- DIN rail mounting DIN (DIN EN 50022 norm)
- Cooling: internal air circulation
Power supply
- 230 V AC
Communication
RS485 Interface:
- Interface RS485 half-duplex
- Up to 128 devices on bus
- Protocols: Modbus
- Baud rate: 2400 to 115200 bps
DALI Interface:
- 2x DALI interfaces (max 16 devices, integrated power supply with 40 mA current limit for each interface)
- Up to 16 DALI ballasts per interface
Environment
- Operating temperature: 0°C to 50°C
- Storage temperature: -40°C to 85°C
- Relative humidity: 5% to 95%, no condensation
- Ingress Protection Rating: IP40 – for indoor installation