The EC-Scheduler device is designed for the storing and management of schedules on a LONWORKS® network or any open, interoperable system, such as EC-NetAX platform. EC-Scheduler is a device dedicated to storing and managing the scheduled events needed for any lighting or HVAC control system.
EC-Scheduler interfaces with up to 250 network variables. In a network, it can communicate with other controllers through its network output variables. The device is based on the LONWORKS® open network system. Furthermore, there is a dedicated output network variable for each of the schedules supported by the device, which can be bound to any of the other devices on your network.
EC-Scheduler can store and manage up to 16 independent schedules. Each schedule includes a template for every day of the week, with a capacity of up to six events per day. For added flexibility, there are four special day templates per schedule, for holidays or other exceptional events in your scheduling. Each EC-Scheduler can be configured using the
ECConfigure plug-in through any LNS® -based software, such as Distech Controls’ Lonwatcher 3. Alternatively, each EC-Light Scheduler can also be configured using the EC-Configure wizard through EC-NetAX which is powered by the NiagaraAX Framework® . Either way, a configuration interface exists to simplify the setup of the EC-Scheduler and scheduling applications through an intuitive menu-based user interface.
Interfaces easily with lighting control systems such as ECScheduler or devices that do not support on-board scheduling.
Centralized scheduling for an entire system.
Manage 16 weekly schedules
EC-Configure EC-NetAX Wizards
Designed for use with EC-NetAX (powered by the NiagaraAX Framework), the EC-Configure EC-NetAX Wizards can be used to easily configure a device’s parameters including inputs, outputs, fan and valve settings, heating and cooling set points, amongst others. Moreover, these wizards can be used to enable and configure additional built-in features such as morning warm-up, load shedding, frost protection and slave operation mode.
EC-Configure LNS Plug-in
Similar to an EC-Configure EC-NetAX Wizard, the EC-Configure LNS Plug-in is a user-friendly configuration interface, which is accessible through any LNS® – based software, such as Distech Controls’ Lonwatcher 3.
Configurable using LNS-based EC-Configure plug-ins, allowing you to quickly and easily configure the EC-Scheduler
Schedule network variables of the SNVT_scene type and allowing the configuration of events based on time of the day or on time relevant to the sunset/sunrise for increased energy savings.
Built-in input for 1/8″ communication jack (3.5mm) for network access