DDC Controller AAC20-LCD-M 2019-02-07T10:15:02+00:00

iSMA-B-AAC20-LCD-M

iSMA

AAC20-LCD-M controller is an advanced device to control building automation and HVAC systems. AAC20-LCD-M provides 8xUI, 4xDI, 4/6xAO and 4xDO. Use of SVM (Sedona Virtual Machine) allows for quick and easy programming in real time-anytime from anywhere.

GET A QUOTE

 The controller provides new extension ModBus which supports communication with electric, water and heat meters for up to 20 devices.

The “Out of box” controller has a built in Modbus Gateway TCP/IP to Modbus ASCII/RTU, enabling you to connect additional modules/devices that communicate via Modbus RS485 without programming it.

Inputs & Outputs

8x universal inputs

All universal inputs have 16-bit resolution which support the following types of inputs

  • Temperature input support the following types of sensors:
    10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1, Pt1000, Ni1000

For sensor Pt1000 and Ni1000 use only 16-bit resolution

  • Voltage input 0-10 V DC: input resistance 100 kΩ accuracy ±0,1% measurement resolution 3 mV @ 12bit and 1 mV @ 16bit
  • Current input 0-20 mA (external resistor 499Ω required)
  • Resistive input 0-1000 kΩ: measurement resolution for 20 kΩ load 20 Ω @ 12bit and 1 Ω @ 16bit
  • Dry contact input

4x digital inputs

  • Dry contact inputs
  • Fast pulse counter up to 100 Hz save in EEPROM memory

4/6 analogue outputs

All analog outputs are equipped with 12-bit ADC provides 10 mV resolution and accuracy less than ±0,5%. They support the following output types:

  • Output 0-10 V DC maximum load up to 20 mA (AO6- 5 mA)
  • PWM: 0,01 Hz, 0,1 Hz, 1 Hz, 10 Hz, 100 Hz

AO5 and AO6 can only be use if 1-wire port is not in use, please notice for AO6 maximum current load is up to 5 mA

4x digital outputs

The relay outputs (NO) max. 3A, 230 V AC / 30 V DC

Platform

  • ARM Cortex-M4 204MHz
  • ARM Cortex-M0 204MHz

Communication

  • Interface RS485 half duplex
  • Baud rate: 2400 to 115200 bps
  • 2xEthernet with built in switch
  • 1-Wire Interface
  • M-bus Interface: up to 20 devices (options)
  • Micro SD card slot
  • USB Host Interface
  • Protocols: Modbus, BACnet, SOX, 1-wire, oBIX (optional)

Power

  • 24 V AC/DC

Housing

  • Dimensions: 106x110x62 mm.
  • Construction: plastic, self-extinguishing (PC / ABS)
  • Mounting DIN (DIN EN 50022 standard)
  • Cooling: internal air circulation

Environment

  • Operating temperature: -10 ° C to 50 ° C
  • Storage temperature: -40 ° C to 85 ° C
  • Relative humidity: 5 to 95%, non-condensing
  • Degree of protection: IP40 – for indoor installation

The datasheet for this product can be downloaded here in PDF format:

DATASHEET
We use cookies on this website, by continuing you consent to our use of them. For more information please read our Privacy Policy.
Holler Box